NBSBL1-100 Series Residual Current Circuit Breaker, IEC61008-1 Standard
Packaging & delivery
Packaging Details
1.Carton size:520*420*200mm
2.GW:27KGS NW:26KGS
3.Packing No.:100PCS
Por NINGBO APPLICATION
NBSL1-100 series residual current circuit breakers are applied to the lines with AC 50/60Hz,rated voltage of230V(1P+N) or 400V(3P+N),and rated current of 100A.In case of electric shock or electric leakage current exceeds the specified value, the residual current circuit breaker can switch off the fault circuit in a very short time, protecting the safety of person and electric equipment.
Can be used in the industrial, commercial, high-rise buildings, civil residences and other places.
Technical Parameter
|
Technical Parameter |
|||
|
Spec Parameter |
|||
| Rated Operating voltage(Ue) | 230V(1P+N)/400V(3P+N) | ||
| Rated Current（In） | 16,25,32,40,50,63,80,100 | ||
|
Poles |
1P+N,3P+N |
||
| Rated Frequency |
50/60Hz |
||
| Rated Insulation voltage(Ui) |
500V |
||
| Rated residual current (IΔn) |
10,30,100,300mA |
||
|
Rated residual switching on and breaking capacity(IΔm) |
500(In=25A/32A/40A), 630(In=63A) ,800(In=80A),1000(In=100A) | ||
|
Rated residual short-circuit current limit(IΔc) |
6000A |
||
| Rated short-circuit current limit(Inc) |
6000A |
||
| Rated switching on and breaking capaity(Im) | 500(In=25A/32A/40A),630(In=63A) ,800(In=80A), 1000(In=100A) | ||
| Maximun breaking time(IΔm) |
0.3s |
||
| Rated impulse withstand voltage(Uimp) |
6kV |
||
| Mechanical life(times) |
＞10,000 times |
||
| Standard Certificate | |||
| Comply with Standard |
IEC 61008 |
||
|
GB 16916 |
|||
| Certificate |
CE, CB, RoHS,WEEE |
||
| Working Envirnment | |||
|
Humidity |
40℃ hum idit y no t e x c eed 50% 20℃ hum idit y not e x c ee d 90% （Condensation on the product due to changes in humidity has been considered） |
||
| Working Temperature | -5℃~+40℃ and its average over aperiod of 24h does not exceed | ||
| Magnetic field | No more than 5 times the geomagnetic field | ||
| Pollution level |
2 |
||
| Altitude（m） |
2000 |
||
|
Mounting and Wiring |
|||
| Shock and vibration | Should be installed in the case of no obvious impact vibration | ||
| Installation category |
Ⅲ |
||
| Terminal connection types | type cable,type U bus, TH 35mm Din-rail | ||
| Wiring terminal connection conductor |
1.5～25 mm² |
||
| Wiring terminal copper size |
25 mm² |
||
| Tightening torque |
3.5N*m |
||
| Installation mode | UsingTH35-7.5 profile installation, the title of installation face and vertical face is not greater than5° | ||
| Wiring incoming mode | upper and lower incoming is possible for ELM type, only upper incoming for ELE type | ||
**Note: When the conditions of use of the product are harsher than the above conditions, itshould be derated, and the specific matters should be negotiated with the manufacturer.
Details
Brief introduction of NBSL1-100 series earth leakage circuit breaker, in line with IEC61008-1 standard
NBSL1-100 series residual current circuit breakers are state-of-the-art electrical safety devices designed to protect individuals and electrical equipment. The circuit breaker is specially designed for AC 50/60Hz lines, ensuring the best compatibility with various electrical systems.
This earth leakage circuit breaker has two voltage options: 230V (1P+N) and 400V (3P+N). The 1P+N configuration is suitable for single-phase systems with neutral, while the 3P+N configuration is suitable for three-phase systems. The NBSL1-100 series is rated at 100A and is capable of handling high electrical loads, making it suitable for industrial use.
One of the main features of the NBSL1-100 series is the ability to detect electric shock or leakage. If the current exceeds the specified value, indicating that there is a potential fault or danger, the leakage circuit breaker cuts off the circuit immediately. This fast response time prevents further damage or injury from occurring, keeping personal and electrical equipment safe.
NBSL1-100 series residual current circuit breakers comply with the IEC61008-1 standard and meet the strict requirements of international safety organizations. This certification assures users that our products meet the highest industry standards and undergo rigorous testing to maintain their quality and reliability.
Additionally, the NBSL1-100 Series is designed with durability and longevity in mind. It is made with high-quality materials and advanced manufacturing processes to ensure its resilience in harsh industrial environments. Plus, its compact, modular design makes installation and maintenance easy and hassle-free.
To sum up, NBSL1-100 series earth leakage circuit breaker is a trustworthy and reliable electrical safety solution. With its ability to detect and quickly respond to electrical faults, it can provide peace of mind to industries across industries. Choose the NBSL1-100 series to provide reliable protection and protection for personnel and electrical equipment.
